Alibaba Store
Tmall Store
Jingdong Sstore
Model: YTGT-24N LCD
Temperature range: RT+5~150 ° C
Time setting: 1min-100h
Temperature stability @ 40 ° C: ± 0.3 ° C
Display accuracy: 0.1 ℃
Heating time: ≤ 15min
Nitrogen pressure: ≤ 0.1MPa
Nitrogen flow rate: 0-10L/min
Air needle length: 150mm
Sample processing capacity: 2 standard modules
Size (mm): 330 L x 220 W x 540 H
Net weight: 8kg
Power supply/power: AC220V 50Hz; 400W
Standard module: 24 holes * 16.5mm
Programming function: 5 groups
Air cooling function: Yes
- Product Details
- Product manual
Yetuo YTGT-24N LCD Dry Nitrogen Blowout Instrument
Model: YTGT-24N LCD
Product Overview:
It not only solves all the disadvantages of the rotary evaporator, especially for small and multiple samples, but also becomes a necessary instrument for every chemical laboratory. For samples that cannot be heated or even need to be cooled and concentrated, only a nitrogen blower can be used for concentration. At the same time, the sample can be temperature controlled and heated, and inert gases such as nitrogen can be quickly, controllably, and continuously blown onto the surface of the sample to achieve rapid anaerobic concentration of the sample solution. This method is time-saving, convenient, and accurate. Widely used in fields such as food safety, medicine, pesticide residue detection, clinical pharmacokinetics, etc.
Product features of Yetuo YTGT-24N LCD dry nitrogen blowing instrument:
Quickly, continuously, and controllably blow nitrogen onto the surface of the heated sample. Based on the evaporation rate and boiling point of the concentrated solvent, set the heating temperature to achieve rapid concentration of a large amount of sample.
This instrument adopts an aluminum plate heating module, which has good heat transfer and uniform heat transfer, which is conducive to rapid heating and temperature control. Blow nitrogen onto the surface of the sample to achieve anaerobic concentration of the liquid to the sample.
● It will not cause cross contamination, and each needle channel on the gas distribution component can be used in combination or separately.
The system has high temperature control accuracy, wide temperature control range, temperature numerical control digital display, and convenient temperature calibration.
● Adjustable bracket, made of alloy material, easy and fast to operate.
● Nitrogen independent valve, with independent control for each purge, saving gas temperature.
Metal module, made of alloy aluminum material, resistant to oxidation and corrosion.
Quick connector, made of copper, easy to use.
